Home  |  Products  |  Services  |  Sitemap  |  Contact Us

 

Flooring Adhesives

Tenco Westech carries a range of high performance water-based adhesive, hybrid polymer adhesive, polyurethane adhesive, glue remover, sealer products for flooring industrial applications.

Industry
 
  1. Hardwood, Engineered & Laminate
  2. Construction & Vinyl
 
 

      

 
 
Hardwood, Engineered & Laminate

 

Deccobond 18

Tongue & Groove      

     

Learn More:

PDS SDS

 

Description:
Advanced non-crystallizing co-polymer emulsion adhesive formulated for radiant heated floors where flexible & resilient bond strength is required. Suitable for use with natural wood or laminates on float floors. Meets the requirement of D3 (EN204) classification for non-structural adhesives for joining wood & panel products. Commercial grade. Cured films provide permanent elastomeric properties.

 

 

Now also available in 4.0 liter jug value pack.

Application:
Tongue & Groove engineered wood or laminates float floors installation, woodworking, overlaying, edge gluing, assembly gluing, finger joining, panel and frame work, solid lumber and other wood work, wood flush doors, spindles, dovetail joints & tenon joints.



 

  Deccobond 381

Gluedown

Wood Flooring Adhesive


Learn More:

 

PDS SDS

 

Description:

Premium grade, high performance hydrophobic hybrid polymer, wood flooring adhesive. Environmentally friendly, solvent & odor free, non-flammable, LEED® compliant, VOC & isocyanates free. Cured films are alkali resistance, waterproof, resilient & non-crystallized, suitable for commercial-grade installations. Flexible open/working time, superior bond strength, resilient setting properties. Anti-fracture membrane that bridges cracks up to 1/8“. This revolutionary formulation with high solids is ideal for wood flooring glue-down installation over various subfloor systems including in-floor hot water radiant heated subfloor. Anti-microbial protection which inhibits molds in damp environment.

Application:

Installation of all engineered hardwood, acrylic impregnated laminates, plywood, bamboo, cork, parquet wood flooring, vinyl backing wood flooring, and flat milled solid hardwood plank*. It is ready to use and no mixing required.




 

  Deccobond 938

Tri-Force Gluedown

Wood Flooring Adhesive

  


Learn More:

 

PDS SDS

 

Description:

Designed with triple benefits, Sound Abatement, Moisture Control, and Resiliency. A high performance adhesive, Hydrophobic Hybrid Polymer, incorporated with recycled rubber & bio-composite suitable for engineered wood flooring. Environmentally friendly, solvent & odor free, non-flammable, LEED® compliant, VOC & isocyanates free. Alkali resistance and waterproof, resilient & non-crystallized, commercial-grade. Flexible open/working time, superior bond strength, flexible & resilient setting properties. Anti-fracture membrane that bridges cracks up to 1/8“. Anti-microbial protection which inhibits molds in damp environment. In-floor hot water radiant heated subfloor compatible. DECCOBOND 938 provides superior sound abatement membrane over subfloor replacing the use of various acoustical underlayment & expensive process of gluedown with underlayment. It is very effective with Impact Sound Reduction, ASTM 2179 Impact Insulation Class & Sound Transmission Class ASTM E90-09 STC.

Application:

Installation of all solid* plank flat milled, engineered hardwood, acrylic impregnated laminates, plywood, bamboo, cork, parquet wood flooring, and vinyl backing wood flooring. It is ready to use and no mixing required.



  Deccobond 151
Hardwood Glue

Learn More:

PDS SDS

  Description:
White polymer emulsion adhesive for use on hardwood such as maple oak. Give very strong bond & is water resistance. Meet ANSI - Type II requirement.
Application:
Manufacture of engineered wood floor strips & planks, finger joints. Meet ANSI - Type II requirement.


  Deccobond 155
Type I & II Waterproof Glue

Learn More:

PDS SDS

  Description:
White polymer emulsion adhesive for use on hardwood such as Maple and Oak. High bond strength and a superior waterproof adhesive. Meet ANSI - Type I & II requirement.
Application:
Single component waterproof adhesive. Meet ANSI - Type I & II specifications.


 

Deccobond 918

Gluedown

One-part moisture Cure

Urethane Glue


Learn More:

 

PDS SDS

  Description:

One-part, moisture cure hardwood

flooring urethane adhesive. 100% solid, LEED® & VOC compliant, fast set, light weight trowelling, cured film is waterproof and with superior elastomeric & resilient properties suitable for installation over in-floor hot water radiant heated subfloor.

 

Application:

Installation of all solid plank flat milled, engineered hardwood, acrylic impregnated laminate, plywood, bamboo, cork without vinyl backing, and parquet wood flooring.



  Decco Glue Remover
Glue Remover

Learn More:

PDS SDS

  Description:
Professional-grade general purpose spot, glue, urethane glue, contact cement remover. Effective for use as fabric & carpet spot remover, including sticker labels, chewing gums, tree sap, wax etc.
Application:
For removal of smudges, tough mastic, dry adhesive film for hardwood floor. Idea for cleaning gluing tool. Used by flooring professionals.


 

 

Decco Wood Floor Repair Kit
FIX-IT Drill & Fill

Learn More:

PDS

  Description:

Total Wood Flooring Repair Kit is a complete repair kit you need to repair: hollow spots, squeaks, end-lifting, delamination for engineered hardwood floors. These floor defects are caused by adhesives fail to perform, sub-floor not level, installation defects, wood floor quality creeping due to radiant heat cycling over time, etc.

 

Application:
Repair floor defects: hollow spots, squeaks, end-lifting, delamination.

Solvent free, VOC free, eco-friendly,

non-flammable. 5 Easy steps to repair.

No more: "bouncy", "springy", "creaking", "spongy", "popping", "delam" floors! Repaired floors feel SOLID.

For flooring professionals & DIY.


Back to the top

Construction & Vinyl

 

  Deccobond 10
White Glue

Learn More:

PDS SDS

 

Description:

General purpose white glue for flooring, construction, sub-floor, woodworking, cardboard, paper, fabric, concrete, leather etc. Non-toxic, low VOC, non-flammable, dries clear, environmentally friendly.

Application:

Bond plywood, hardwood, gympsum board, drywall, sub-floor etc. Suitable for mixing with plaster, tile grout, mortar mix, sand mix cement, to create permanent bonds, joints to walls, floors, ceiling etc.


 

  Deccobond 380
Vinyl Decking Adhesive

  

Learn More:

PDS SDS


 

Description:

Roll-on premium grade, high performance hybrid polymer, interior & exterior vinyl decking adhesive. It is environmentally friendly, solvent free, phthalate free, odor free, non-flammable, LEED® and VOC compliant. Moisture and alkali resistant, which makes it suitable for commercial-grade installations. It has flexible open working time, superior bond strength & hard setting properties. Cured film is resilient and forms an anti-fracture membrane that can bridge cracks up to 1/8“. Ideal for vinyl decking glue-down installation over various subfloor systems including in-floor hot water radiant heated subfloor. Anti-microbial protection which inhibits molds in damp environment.

Application:

Installation of all type of vinyl decking sheet with various thicknesses. It may also be used for vinyl (solid, pure, luxury) plank, sheet, tile, rubber tile, vinyl backed carpet, vinyl composite tile (VCT). It is ready to use and no mixing required.


 

  Deccobond 390
Vinyl Flooring Adhesive

Learn More:

PDS SDS


 

Description:

Premium grade, high performance hybrid polymer, vinyl flooring adhesive. It is environmentally friendly, solvent & isocyanates free, odor free, phthalate free, non-flammable, LEED® and VOC compliant. Moisture and alkali resistant, which makes it suitable for commercial-grade installations. It has flexible open working time, superior bond strength & elastomeric properties. Cured film is resilient and forms an anti-fracture membrane that can bridge cracks up to 1/8“. Ideal for vinyl flooring glue-down installation over various subfloor systems including in-floor hot water radiant heated subfloor. Anti-microbial protection which inhibits molds in damp environment.

Application:

Installation of all type of vinyl sheet with various thicknesses. It may also be used for vinyl (solid, pure, luxury) plank, sheet, tile, rubber tile, vinyl backed carpet, vinyl composite tile (VCT). It is ready to use and no mixing required.


 

  Deccobond 710
Vinyl PSA Flooring Adhesive

  

Learn More:

PDS SDS


 

Description:

High performance hybrid polymer, pressure sensitive adhesive (PSA) for vinyl flooring. It is environmentally friendly, solvent free, phthalate free, non-flammable, LEED® and VOC compliant. Cured films are moisture, alkali & plasticizer migration resistant, which make it suitable for commercial-grade installations. It has high shear strength, flexible open working time & resilient setting properties which makes the cured films resilient. It is formulated with releasable bonding properties for easy replacement or repair. It provides high tack and resistance to lateral movement. It allows removal of vinyl tiles or planks to facilitate replacement of damaged planks or access electrical or work areas beneath vinyl floor. Anti-microbial protection which inhibits molds in damp environment.

Application:

Installation of all type of vinyl (solid, pure, luxury) plank, sheet, tile, rubber tile, vinyl backed carpet tile, vinyl composite tile (VCT). Ethylene Vinyl Acetate (EVA), Polypropylene, and Polyurethane cushion back. Always check manufacturer guidelines and Carpet & Rugs Institute Standard for Commercial Installation CRI 104 where appropriate. 


 

  DeccoSeal 506
Waterproofing Barrier Coat


Learn More:

PDS SDS

 

Description:
A cold-applied, single-component, hydrophobic hybrid-polymer, and waterproofing compound. It does not shrink. It is solvent free, LEED® and volatile organic compound (VOC) compliant, and has very low odor. It will not crack in extreme cold. It dries clear and cured film can withstand hydrostatic pressure of 10 lbs of more. It is ideal for waterproofing barrier in glue-down wood flooring and suitable for in-floor hot water radiant heated subfloor with adhesive applications.

Application:

Interior or exterior surfaces, such as but not limited to concrete, masonry, metal, and wood surfaces where protection from water intrusion is desired. The product can be used for both above-grade and below-grade applications. It is also suitable for both horizontal and vertical surfaces.


 

Back to the top